BASIC BOARD PRACTICE
CONTENT
- Setting Drawing Paper on the Board
- Sharpening of Drawing Pencils to Conical Point and Knife Edge
- The Instruments Required for Good Board Practice
Setting Drawing Paper on the Board
Step 1:
The drawing board is conveniently placed on the table with the paper on the board, leaving equal size all rounds, with the Tee-square edge to the left hand side.
Step 2:
Place the tee-square on the paper and gently move or slide the tee-square to the top edge of the paper. Set the top edge of the paper parallel to the edge of the tee-square with the stock of the tee-square firmly against the edge of the drawing board on the left-hand side.
Step 3:
Hold the paper with four pieces of adhesive tape or two metal clips to hold the paper in position at four corners.
Step 4:
Gently slide the tee-square down without moving the paper.
Sharpening of Drawing Pencils to Conical Point and Knife Edge
You are viewing an excerpt of this lesson. Subscribing to the subject will give you access to the following:
- NEW: Download the entire term's content in MS Word document format (1-year plan only)
- The complete lesson note and evaluation questions for this topic
- The complete lessons for the subject and class (First Term, Second Term & Third Term)
- Media-rich, interactive and gamified content
- End-of-lesson objective questions with detailed explanations to force mastery of content
- Simulated termly preparatory examination questions
- Discussion boards on all lessons and subjects
- Guaranteed learning